Autorrefractómetro de frente de onda Huvitz HRK-8000A (nuevo)

9350,00

Tecnología de frente de onda; Mapa de aberraciones de alto orden; Queratometría y refractometría continuas; Medición de la curva base de lentes de contacto; Queratometría periférica; Vista en color y asistencia para la adaptación de lentes de contacto (luz LED blanca y azul).

SKU 318 Categorías , Etiquetas ,

Descripción

Wavefront Technology, Hartman-Shack Micro-Lenslet Array.

Features

  • Color screen movable touch. 7-inch LCD touchscreen, bright and contrast. The resulting image has a high resolution. The tilt of the monitor can be adjusted, which allows the resulting image to be independent of the viewing angle.
  • The measurement speed is very high, in comparison with other similar devices.
  • The printer is quiet and fast. The thermal printer is automatic, with the function of auto-cutting paper. A new advantage of the autorefkeratometer is the replacement of paper in one motion.
  • When measuring aberrations, getting more data. HRK-8000A has the ability to measure fourth-order aberrations, which so far has been available only to wavefront aberrometers. Based on the obtained data, a high and low order graphical Zernike refraction map is constructed, which gives a more complete picture of the eye condition of the patient under study, and allows you to prescribe the best and most accurate treatment.
  • The modes – color and landing contact lenses. Using the full-color camera used in this device, you can see what was previously possible only with the help of a slit lamp: the eye, contact lens and its landing. The HRK-8000A autorefkeratometer for the first time in the world applied contact lens landing mode using color filters and a fluorescent solution.
  • Contact lens fit and necessary curvature are measured and analyzed automatically.
  • 3D auto search. The device can move in three planes, and also has an ultra-sensitive sensor. This gives him the opportunity to automatically find the focus of the eye and take the necessary measurements.

Specifications:

Measuring modes K/R Mode Refractory keratometer mode
REF Mode Refractometric mode
KER Mode Keratometer mode
CLBC Mode Measuring mode of basic CL curvature
KER P Mode Keratoperiphery mode
Color View Mode Colour inspection and contact lens fit control mode
Refractometry Vertex distance (VD) 0.0,12.0,13.5,15.0
Sphere(SPH) -30.00~+25.00(VD-12)(Step: 0.01,0.12,0.25)
Cylinder 0.00±10.00 (Step: 0.01,0.12,0.25)
Axis 0-180˚ (step 1˚)
Cylinder shape -,+,±
Center-to-centre distance (PD) 10~85mm.
Min. pupil diameter 2.0mm.
Keratometry Radius of curvature 5.0~13mm: 0.01)
Corneal power 25.96~67.50D: 0.01,0.12,0.25)
(at the equivalent of the cornea to the refractive index 1.3375)
Corneal astigmatism 0~15.00D: 0.05,0.12,0.25)
Axis 0-180˚ (step 1˚)
Pupil diameter, irises 2.00~14.00 (Step: 0.1mm)
Memory 10 latest measurements for each eye
Other Screen 7 inch LCD touch screen with tilting function
Built-in printer Thermal printer with auto-cutting
Energy Saving Auto Power Off (5min)
Power supply 100-240V, 50/60Hz, 60W
Dimensions/mass 262x518x441mm / 20.9kg

 

Volver arriba